Step 1

I marked off 18" squares along two walls. I divided the 18" into the width and height of the walls.

Since I started the squares in the corner (the focus as you enter the room) any remaining amount will be at the opposite end of the wall. Depending on the baseboard trim you have the last row of squares (I have 5), may not be quite 18".

Mine ended up right on (yeah!). I used blue painters tape to mark off my first squares to be painted. You have to stagger the taped areas as you can't paint right next to another row until the first has dried.

Step 2

My original walls were white, which I used as one of my colors. I bought a quart of pale taupe latex wall paint to use as my darkest shade. Then I mixed 50/50 the original white paint with the taupe to create my third color.

This goes fast as I'm actually only painting 2 colors - the third being the wall color.

After the first step is dry, I can tape the next section to be done. See why the planned layout on paper is a good idea?

Step 3

I keep repeating painting squares as earlier ones are dry until all the painting is done.

I mark off on my paper layout which squares have been painted so it's easy to see which need to be done next - especially when your colors are such a close shade to each other.

The finished effect is fun and really brightens the room! I left the other two walls the original white color. It makes the embellished walls much more of a focal point.